Our concave wooden cones (phase-plug) in the center of the drivers optimize the off-axis-response of high frequencies (over 30° angle) through reflection, achieving a vivid, spatial, and engaging sound. The wooden cones, as well as the back covers, are individually handcrafted from recycled, and certified wood.

For our MAPU Mono & Stereo speaker we use 4” full range drivers, getting the entire frequency audio spectrum with 30/45W power! and 80W IEC power handling. 
For the MAPU 2.1 speaker we use two 3” mid/high drivers in combination with a 5¼” woofer to get a clear and powerful (60/105W) spatial stereo sound.

We use natural felted wool for the acoustic insulation of our speakers. Wool does not store static electricity and is non-flammable, thus protecting the speakers’ internal components. Unlike synthetic fibers, natural felted wool is biodegradable, and made without the use of harmful chemicals. Leather and cork have ideal physical properties for our insulation purposes, they are elastic and malleable, have high tensile strength and are inherently resistant to heat.

After the firing process of over 1000°C, the clay becomes a very strong material with high density, which minimises natural oscillation. The spherical asymmetric shape of the cabinet avoids internal annulation (acoustic short circuit - typical problem in squared enclosures) and prevents unwanted resonances that could reduce audio quality. This highly advantageous shape is almost impossible to accomplish in wood. The only feasible would be high-density plastic or aluminum casting, both of which have a high environmental impact.

The new bi-ported enclosure design boost the volume of low frequencies for a deep and powerful bass.
Both copper bass reflexes are acoustically engineered to minimize airflow noise and distortion, extending the low frequency response to below 50 Hz.

Our active Speakers are state of the art in electronics, equipped with Class D amplifiers, BT V5.0 Qualcomm aptX Codec & AAC, support A2DP V1, DSP (Digital Signal Processor) with SpeakerGuard™, providing a natural sound with very high dynamic range, minimal distortion and low noise output. They can be accessed and operated wirelessly from any BT device up to a distance of 20m or via AUX 3.5 mm mini-jack.
No dedicated control app is required.

Every MAPU Speaker is a unique and numbered piece of art. The hands that craft them and the fire in the kiln leave their traces and make every speaker special and a little different from the others.